The secondary side of a current transformer must not be open-circuited, and the primary reasons are as follows:
High Voltage Generation
Under normal operating conditions, the impedance of the loads connected to the secondary side of a current transformer (such as ammeters, relays, etc.) is extremely low, approaching a short - circuit state. Based on the transformer's operating principle, the magnetomotive force generated by the primary - side current and that generated by the secondary - side current balance each other, maintaining the magnetic flux within the core at a relatively low level.
When the secondary side is open - circuited, the secondary - side current drops to zero, eliminating the associated magnetomotive force. Meanwhile, the primary - side current remains constant, and its entire magnetomotive force is then solely used for excitation. This causes the magnetic flux in the core to surge and reach a saturation state.
According to Faraday's law of electromagnetic induction, the secondary - side winding induces a significantly high electromotive force (EMF). This EMF can reach several thousand volts or even higher, depending on factors such as the transformer's parameters, the magnitude of the primary - side current, and the core's characteristics. Such high voltage poses severe risks to equipment and personnel. It can puncture the secondary - side insulation, damage measuring instruments and relays, and even lead to electric shock accidents.
Core Overheating
The sudden increase in magnetic flux due to secondary - side open - circuiting drives the core into a highly saturated state, causing a substantial increase in losses.
These losses primarily consist of hysteresis and eddy - current losses, which lead to rapid heating and a sharp rise in the core's temperature. Prolonged exposure to high temperatures causes the core's insulation material to age, embrittle, and further degrade in insulation performance, potentially resulting in insulation breakdown. Additionally, elevated temperatures can compromise the current transformer's accuracy and stability, increasing measurement errors and hindering proper operation.
Impact on Measurement Accuracy
During normal operation, a defined proportional relationship exists between the primary and secondary currents of a current transformer, enabling accurate measurement of the primary - side large current.
However, when the secondary side is open - circuited, the core's magnetic characteristics deviate from the normal linear behavior. This distortion disrupts the proportional relationship between the secondary - induced current and the primary current, leading to significant measurement errors.
In applications demanding high - precision measurements, such as power system metering and protection, these inaccuracies can have severe implications. For instance, inaccurate metering can cause discrepancies in electricity billing, while incorrect operation or failure of protective devices can jeopardize the safe and stable operation of the power grid.



