Low voltage surge protection device (SPD for short), is a device used to suppress the damage to low-voltage electrical systems (such as family, business places and industrial equipments) caused by lightning or operational overvoltage. Its core function is to quickly conduct the surge current and limit the voltage within a safe range, so as to protect the back-end devices.
1.Core function
It uses the components such as metal oxide varistors (MOV), gas discharge tube (GDT), transient voltage suppression diode (TVS) and so on, to conduct the current when the voltage exceeds the threshold, to introduce the surge energy into the grounding system in order to prevent equipment damage.
2.Typical application scenarios
Power system: substations, distribution cabinets, photovoltaic systems, etc., where need to guard against grid fluctuations and lightning-induced overvoltage.
3.Communication network
Signal lines (such as optical fibers, Ethernet, and antenna feeders) must be able to withstand the lightning and transient overvoltage.
4.Industrial control
Prevision equipment (such as PLC, sensor) must be able to ensure the safety of data transmission.
5.Key technical parameters
Maximum continuous working voltage (Uc): which needs to be more than 1.15 times of system maximum running voltage (for example, for 380V system, Uc≥440V).
Nominal discharge current (In): usually is 5kA – 20kA, for the primary protection, should be ≥15kA.
Voltage protection level (Up): for class I type SPD, Up≤4Kv; for prevision equipments, Up≤1kV.
If you are interested in our products, please inquire now!
Contact Us
Mob: +8613567775851
Tel: +86-577-62703879
Fax: +86-577-62706375
Email: chtent@chtentcn.com
Add: No. 75-81 Shadong Road, Shaxi Industrial Zone, Liushi Town, Yueqing City, Zhejiang Province (Building A, Liusha Yayuan)



